The lift system - 2

Finally I managed to test the lift system with the periscope. I was a bit worried because the periscope is much heavier than the life scanner, so the servo and the gears could not be enough to lift it.

The body - 1

Well, this will be the most intensive part of the whole droid. The body is made up of several different parts to be printed and most of them needs 3-4 hours of printing (sometimes more).

Anyway the building is a quite linear task, so there should be no problems or at least they should be really few. 

My only concern is about ABS warping. With the new printer and the enclosure this has been quite reduced, but still visible in the biggest parts. I will surely need to make some post printing fixes...

That's what I have done until now...

The periscope - 2

I completed the painting and the assembly of the droid periscope. Now it's just a matter of putting some "special effect" on the inside...

The dome - 3

At last the boring part is ended. All the sanding, filling and painting tasks are done and my droid dome is going to be complete soon!

The dome - 2

After printing and gluing all the dome pieces it cames the tedious part. You need to remove the 3D printing artifacts and the defects to make the parts as smooth as possible and this could be a long lasting task...

The periscope - 1

This is another feature I wish to add to the R2 dome. In this case I found a really good model on Thingiverse, but I changed something anyway.

The biggest mod respect to the part found on Thingiverse is the top removal. This piece will be glued to a cover, so I see no need to print this also in the periscope. This way the model is also easier to print.

The life scanner - 1

One of the features I want to add to my R2 unit is the life scanner. I found several models on the internet, but none of them satisfied me, even if they are really beautiful, so I just designed one by myself...

The dome - 1

The "easiest" part to print of this R2D2 is the dome. It's made up of several pieces that must be printed, glued together, sanded and painted. As I wrote in the introduction, there is a long post produtcion work to do if you want a good loking Astromech...

Intro

Since the first Star Wars movie in 1977, when I was a child, one of my dreams was to built and Astromech. For years this was just a dream, even if I followed several times the progresses of other people on the web, particularly from the R2 Builders Club.

Unfortunately, the parts weren't easily found, at least in Italy, so I always posponed my intents to build this robot...